Single, double, triple or quadruple workstation
The highly minimalist luminaire series is optionally available as a floor or pendant light.
Precise Light Guiding
A perfect glare reduction of UGR<16 is achieved by Lens using a black high-gloss grid in combination with set-back, specially adjusted lenses
Standard-compliant illumination (EN 12464-1) of a double workstation 160 x 80 cm with a uniformity > 0.6
Work atmosphere summed up
With a direct/indirect light distribution ratio of 40:60, this modern luminaire series offers the required light distribution characteristics for workplace lighting. For individual operation, Lens is available in three different control variants: A switch for simple dimming, a Motion Daylight version with a switch on the mast to override daylight-dependent automation, and a Motion Swarm version with daylight, motion sensor, and swarm function.
The convenient daylight-dependent control with motion detector and the intelligent swarm function regulate energy consumption efficiently and provide a consistently comfortable light ambiance at the workplace or throughout the room. The automatic functions allow you to focus on what’s essential and lay the essential groundwork for efficient work.
Function Button & USB Socket
In modern office architecture, glass partition walls are often used, making it difficult to install a conventional switch. An optional radio button, for wireless mounting on such glass walls, provides the optimal solution.
Lens F can be equipped with a simple switch or with a high-quality film switch with an integrated USB socket for charging mobile phones and tablets.
Lens is available in black, white or anodized aluminum. Thanks to its high variability and slim design, this high-end luminaire blends perfectly into any office architecture.
Certified quality
MOVA is considered a ENEC certified electrical product and therefore has a high-quality label as proof of compliance with European standards. The ENEC test mark stands for the highest safety levels in Europe! Independent testing laboratories, as well as manufacturer laboratories approved by ENEC, carry out the tests in all electrical product sectors.
